Lime Universal Scraper 683


Fine smoothing and textured filler for interior use.

Application range: 

For interior use.

Technical qualities: 

High-quality, organic, white lime putty for filling holes and smoothing walls. Thanks to its moisture-regulating properties and high pH value, LEINOS universal lime putty is ideal for use in mold remediation.

Full declaration: 

Marble powder, limestone powder, hydrated white lime, hydrated lime, methyl cellulose, vegetable polysaccharide. Polysaccharide.


Substrates must be non-slip, dry, firm, clean, free of release agents, dust, loose particles and sintered skin. All mineral substrates are suitable, such as lime or gypsum-lime plaster, cement, gypsum fiberboard. Substrates that are slightly sandy or highly absorbent must be consolidated with LEINOS Deep sealer 620. Thoroughly mix 10 kg Lime Universal Scraper with approx. 4.5 liters of clean water until lump-free.


Apply within 5 hours with a plastering board or smoothing trowel in layer thicknesses of 1 to 4 mm. The surface is felted or smoothed. Do not apply at temperatures below 5° C and allow to dry. LEINOS Lime Universal Scraper can be used with all LEINOS interior wall paints and plasters. Clean tools with water immediately after use.

Drying time: 

Depending on the thickness of the layer, but at least 24 hours.

Container sizes and coverage: 

Consumption per mm application thickness/m2 approx. 1 kg.

10kgDepending on application thickness

* Coverage per coat



Dry and frost-free. Shelf life for 1 year.


Clean equipments after use with water.

Special advice: 

Always create a test area of at least two square meters to check the adhesion behavior. The test area must be thoroughly dry before a definitive assessment of adhesion and cracking behavior can be made. Do not leave the material wet but in a bucket to dry out and dispose of with household waste. With their special properties, LEINOS lime paint products are in keeping with a very old paint tradition and have recently become increasingly popular, especially in the field of mold remediation, due to their high pH value. A slight cloud formation, glossy lime sinter layers and color variations on the wall surface correspond to the typical appearance of a lime paint coat. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties of lime paint coatings. The ageing of lime coatings takes place through a continuous, very slow reduction in layer thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect.

Hazard statements: 
Causes skin irritation. Causes serious eye damage. May cause respiratory irritation.

Gefahrzeichen  Gefahrzeichen



Precautionary statements: 

Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN:  Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid breathing spray mist. Keep out of reach of children. Avoid release to the environment. Dispose of contents/container according to local regulations.