Always create a test area of at least two square meters to check the adhesion behavior. The test area must be thoroughly dry before a definitive assessment of adhesion and cracking behavior can be made. Do not leave the material wet but in a bucket to dry out and dispose of with household waste. With their special properties, LEINOS lime paint products are in keeping with a very old paint tradition and have recently become increasingly popular, especially in the field of mold remediation, due to their high pH value. A slight cloud formation, glossy lime sinter layers and color variations on the wall surface correspond to the typical appearance of a lime paint coat. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties of lime paint coatings. The ageing of lime coatings takes place through a continuous, very slow reduction in layer thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect.