Liquid Wax 342

Öle und Wachse

With integrated Primer. Interior.

Application range: 

For the single open-pored treatment of untreated respectively absorbent interior wood surfaces which are only slightly exposed to mechanical wear and tear. Not suitable for surfaces which are exposed to splash water.

Technical qualities: 

Easy to apply. After drying a silk sheen will may be effected by polishing. Water vapour permeable.


Transparent, colourless to slightly yellow.

Full declaration: 

Beeswax, carnauba wax, linseed oil, linseed oil-wood oil-stand oil, linseed oil-wood oil-stand oil-natural resin ester, alumina, isoparaffines and lead-free driers.
The VOC content of this product is max 390 g/l. EU limit value max 700 g/l (class “f” 2010).


Stir well before use. Apply by brush or dipping at temperatures  above 15°C. Polish after drying.

Drying time: 

Approx. 18 - 24 hours. It is essential to provide adequate ventilation during the drying process!

Container sizes and coverage: 

Approx. 90 ml/m2 per coat depending on the surface absorption.

0,25l2,5 m2
0,75l7,5 m2
2,5l30 m2
10l110 m2

* Coverage per coat

Zum Verbrauchsrechner >>



Originally sealed  at least 5 years stable. Store dry, cool and sealed.


According to locally regulated laws. European Waste Catalogue (EWC) 08 01 11.


LEINOS Thinner 200. Product is adjusted ready for application.

Hazard statements: 

Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request.

Precautionary statements: 

Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container according to local regulations.
Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with product in an airtight metal container or in water and dispose, as there is a danger of spontaneous combustion caused by the plant oil content in the product.
The product alone will not undergo spontaneous combustion.
A typical smell may arise due to the natural raw materials.
During sanding wear mask against respirable dust.