Low odour, VOC-free, breathable.
For white or coloured opaque coatings with good water vapor permeability on mineral bases or on wallpaper with firm and good adhesion.
Good hiding power, easy to apply, high yield. VOC-free, non-yellowing, water vapour permeable according to DIN/EN ISO 7783-2 class 1. Washable according to DIN/EN ISO 11998 und DIN EN 13300, class 3.
Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, talcum, kaolin, methyl cellulose, isothiazolinone. The product contains max 1g/l VOC. EU limit value for this product (cat. a): 30 g/l (2010).
The surface must be absorbent, dry, solid, clean and free of dust and grease and be free of parting agents, cracks, scum and fungi. Stir well before use! Apply by brush or roller at room temperatures above 12 °C.
At 20°C and 50% relative humidity: first coat after 16 hours, furthers coatings after 24 hours. Allow to dry for 2 days before applying glaze products.
Approx. 150 ml/m2 per coat, depending on the absorbency of the surface.
* Coverage per coat
Under cool and dry conditions. Shelf life of unopened container 1 years. Close lid tightly when not in use. Protect against frost!
According to locally regulated laws. European Waste Catalogue (EWC) 08 01 20
Clean equipments immediately after use with warm water and LEINOS Vegetable Soap 930.
Keep out of reach of children.
Do NOT induce vomiting.
Dispose of contents/container according to local regulations.
Hotline for allergy sufferers: ++49 (0) 4163 - 86 74 70
Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Safety data sheet available on request.