Facade Stain 264


Water resistant and open-pored coating for wooden facades outdoors.
Application range: 

Weather resistant, open-pored and waterproof coating for all exterior wooden facades and screen of boards.

Technical qualities: 

Suitable for glazing or covering depending on thickness of coating. Excellent weather resistance, water vapour permeable and colour preserving.  Good block resistance therefore suitable for windows and doors.


712 silver grey, 713 silver anthracite.

Full declaration: 

Ricinen oil- natural resin-ester, natural resin-ester, wood oil- -stand oil, kaolin, zinc oxide, alumina, micro wax, isoparaffins, silicic acid, natural asphalt, mineral pigments, jodo-propynyl-butyl-carbamate, drying agents. The product contains max  400 g/l VOC. EU limit value for this product (cat. f): 700 g/l (2010)


The surface must be dry, firm, clean, fat- and dust free and absorbent. A pre-treatment with Impregnation Primer 150 for film protection is recommended.


Stir well before use. Apply by brush, roller or spraying at temperatures  above 12°C. Depending on needs, the wood surfaces are sanded with 120 grains in fiber direction. The product can also be applied directly on rough-sawn wood. Priming with Impregnation Primer 150.  Apply 1-2 coats with Façade Stain 264. Let each coat dry thoroughly. No intermediate sanding necessary. For maximum results it is essential to observe the details stated in the technical data sheets of all products.

Drying time: 

At 20°C and  50 - 55% relative humidity dry and workable after approx. 16-24 hours. The product needs sufficient air for drying. Ensure good light and ventilation conditions during use and drying times. 

Container sizes and coverage: 

Approx. 40 - 60 ml/m2 per coat.

0,75l15 m2
2,5l50 m2

* Coverage per coat

Zum Verbrauchsrechner >>



Under cool and dry conditions. Close lid tightly when not in use. Shelf-life of unopened container 2 years.

According to locally regulated laws. European Waste Catalogue (EWC) 08 01 11.

LEINOS Thinner 200. Product is ready for application. Stir well before use.

Hazard statements: 

Harmful to aquatic life with long lasting effects.
Repeated exposure may cause skin dryness or cracking.
Contains Iodo-2-propynyl-butylcarbamate. May produce an allergic reaction.
Active ingredient: Iodo-2-propynyl-butylcarbamate <0,6%
Safety data sheet available on request.

Precautionary statements: 

Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container according to local regulations.
Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with product in an airtight metal container or in water and dispose, as there is a danger of spontaneous combustion caused by the plant oil content in the product. The product alone will not undergo spontaneous combustion. A typical smell may arise due to the natural raw materials. During sanding wear mask against respirable dust.