Imprägnierungen und Grundierungen
Wood solidifying agent, water-based, protects the wood against mould and insect infestation by physical-mechanical reactions.
Also suitable for porous wood.
Preventive breathable wood solidifier, protects the wood against mould and insect infestation by physical-mechanical reactions, also for wood work within roofed exterior areas and woodwork used in damp and humid rooms.
Preventive against mould and insect infestation, water vapour permeable. Also suitable for the restoration (solidification) of old wood. Very effective in disguising wood-work against woodworm and insects etc.
Colourless, slightly yellow.
Water, aluminium oxide, silicic acid, potassium palmitate, magnesium oxide, potassium chloride, fatty acids. This product contains max. 1 g/l VOC. EU limit value for this product (cat. a): 30 g/l (2010)
Applied by brush or spraying: approx. 100 ml/m2 per coat. At least two coats necessary! Applied by dipping: Approx. 15 litre/m3. The ambient and surface temperature must be higher than +15°C.
At 20°C and 50% relative humidity: Subsequent treatment after approx. 24 hours, when the wood is completely dried.
Application by brush or spray: approx. 100 ml/m2 per coat. At least two coats are necessary! Dipping respectively steeping: approx. 15 l/m3.
Sizes | Coverage...* |
---|---|
1l | 10 m2 |
2,5l | 25 m2 |
10l | 100 m2 |
20l | 200 m2 |
* Coverage per coat
Under cool and dry conditions, prevent from freezing. Shelf life of unopened containers nearly 5 years.
According to locally regulated laws. European Waste Catalogue (EWC) 08 01 20.
Safety data sheet available on request.
Keep out of reach of children.
Avoid release to the environment.
Dispose of contents/container according to local regulations.