Stone and Concrete Oil 254
Öle und Wachse
For surface treatment of all types of concrete and stoneware, indoors.
For impregnating and maintaining all absorbent tiles and concrete surfaces, such as terracotta etc.
Protects against general soiling, grease and oil. Suitable for protecting cement joints. Water-repellent and abrasion-resistant, does not noticeably change the colour of the surface. For interior use.
Colourless.
Wood oil, linseed oil, ricin oil, sunflower oil, natural resin ester, isoparaffins, drying agents. The VOC content of this product is max. 420 g/l. The EU limit value is max. 700 g/l (category f from 2010).
Stir carefully before use. Apply with a brush, cloth, roller or sponge. The surface must be dry, clean and free of grease and dust. Apply the stone oil with a brush or roller. After a penetration time of approx. 20-30 minutes, remove any excess oil from areas that are still absorbent and polish the surface dry with a cloth or pad. Apply another thin coat the next day and apply as described above. If necessary, apply a 3rd coat depending on the absorbency of the substrate. Important: No oil layer must remain on the surface!
Dry and recoatable after 4 - 6 hours (18 - 22°C / 50 - 55% relative humidity). Complete drying takes approx. 7 - 10 days.
20 - 50 ml/m2 depending on the absorbency of the substrate.
Sizes | Coverage...* |
---|---|
0.75l | 21.5 m2 |
2.5l | 71.5 m2 |
2,5l | 63 m2 |
* Coverage per coat
Store cool and tightly closed. If a skin forms, remove it before reuse. Sieve oil if necessary.
In accordance with local, official regulations. Dried product residues can be disposed of with household waste. Waste code: EWC 08 01 11
Clean with pH-neutral cleaning agent in lukewarm water.
Safety data sheet available on request.