Interior Smoothing and Texturing Filler 684
Wandgestaltung
For interior use for finishing walls and ceilings. For filling cracks and holes as well as joints between plasterboard and other building boards. For securing wall plugs and inserting fixtures during installation work. For decorating walls and ceilings with texturing filler.
White, matt. Ready mixed and can be coloured as required using LEINOS pigment concen-trate 668. See technical data sheet 668.
Finely ground calcium sulphate (natural gypsum), calcium carbonate and methyl cellulose.
The base to be treated must be clean, firm, dry and good bearing.Dust, dirt, wallpaper, paint which is not securely adhering or only weakly bonded as well as flaking or loose plaster must be removed. Mixing ratio: 2 parts by volume of smoothing and texturing filler to 1 part by volume of water. Stir briefly after 2 - 3 minutes.
For filling holes and cracks press the 684 smoothing and texturing filler down into the recess and smooth off. For making good smooth surfaces rub down as required ordampen evenly with a sponge board and smooth off. The layer of filler must be com-pletely dry for all subsequent work, such as, for example, rubbing down, over-papering, painting. For fixing plasterboard slabs or walling slabs apply the 684 smoothing and texturing filler in small lumps to the back of the slabs, press them into position and align them.
| Sizes | Coverage...* |
|---|---|
| 1kg | |
| 5kg | Depending on application thickness |
* Coverage per coat
Protect against damp. Store well-sealed in a dry place.
Water and LEINOS 930 vegetable soap.
When filling in the joints between plasterboard slabs it is possible to dispense with the insertion of reinforcing strips, if the slabs are of an appropriate design.
Keep out of reach of children. Avoid release to the environment. Dispose of contents/container according to local regulations.
